Registering the WisePOS E
Before getting started, make sure your payment processing is set up. Check this article
This is Short video on how to set up WisePOS E
1. Unbox Your Reader
Ensure the box includes:
WisePOS E Reader
Battery
Charging block
Charging cable
2. Install the Battery & Charge
Remove the back panel.
Insert the battery, aligning the gold connectors.
Reinstall the cover and power on the device using the side button.
Charge the reader using the supplied cable—plug it into the port marked with the lightning bolt.
3. Select Country & Language
Follow the prompts to choose your country and preferred language.
4. Connect to Wi-Fi
Choose a Wi-Fi network that uses one of the following required encryption types:
WPA/WPA2/WPA3-Personal
WPA2/WPA3 EAP-PEAP Enterprise
Networks must be password-protected.
5. Get a Pairing Mode
Once connected to Wi-Fi, the reader will show the “Register this Device” screen with a pairing code.
If the pairing code does not appear:
Swipe right from the left edge of the screen.
Tap Settings.
Enter the admin PIN: 07139.
Tap Generate pairing code.
6. Register in Yocale
After the pairing code appears:
Go to Yocale → Payments → Payment Methods → Card Reader
Tap Register
Choose WisePOS E from the model list
Enter the pairing code exactly as it appears on the device
Give your reader a name to easily identify it at checkout
Select the location where the reader will be used (if you have multiple locations)
After Registration
Your card reader is now ready to accept payments.
Tips for Best Performance
Charge your reader every night.
Tap the power button to put it to sleep and conserve battery when not in use.
Always charge using a wall outlet, not a laptop USB port.
Having Issues?
Please contact Yocale Support -
1-855-996-2253 extension 1