Registering the S700
Before getting started, make sure your payment processing is set up. Check this article
This is a short video on how to set up S700
1. Unbox Your Reader
Open the box and confirm that all components are included:
S700 Reader
Charging block
Charging cable
2. Charge the Reader
Plug in the device and allow it to fully charge before setup.
3. Power On
Hold the power button located on the top-right side of the device until the screen lights up.
4. Select Country & Language
Follow the on-screen steps to choose your preferred country and language.
5. Connect to Wi-Fi
Select your Wi-Fi network and connect.
Your network must use one of the following password-protected encryption types:
WPA/WPA2/WPA3-Personal
WPA2/WPA3 EAP-PEAP Enterprise
6. Get a Pairing Mode
After Wi-Fi connects, the reader should automatically display a “Register this Device” screen with a pairing code.
If you don’t see a pairing code:
Swipe right from the left edge of the screen.
Tap Settings.
Enter the admin PIN: 07139.
Select Generate pairing code.
7. Register in Yocale
Once your pairing code appears:
Go to Yocale → Payments → Payment Methods → Card Reader
Tap Register
Choose S700 from the model list
Enter the pairing code exactly as it appears on the device
Give your reader a name to easily identify it at checkout
Select the location where the reader will be used (if you have multiple locations)
And you’re reader is ready to use
After Registration
Your card reader is now ready to accept payments.
Tips for Best Performance
Charge your reader every night.
Tap the power button to put it to sleep and conserve battery when not in use.
Always charge using a wall outlet, not a laptop USB port.
Having Issues?
Please contact Yocale Support -
1-855-996-2253 extension 1